图片
产品详情
ERW
Process of coil through cold roll forming and H.F welding continuous producing straight seam welding pipe: uncoiler→ strip steel flattening r→ end shear → strip steel end welding→ accumulator→ forming→ welding→ eliminating burr→ sizing→ flying cutting →initial check →steel pipe straightening →pipe section processing →hydraulic tester →fault detection tester →printing and coating →finished product......

I Brief Introduction
    Process of coil through cold roll forming and H.F welding continuous producing straight seam welding pipe: uncoiler→ strip steel flattening r→ end shear → strip steel end welding→ accumulator→ forming→ welding→ eliminating burr→ sizing→ flying cutting →initial check →steel pipe straightening →pipe section processing →hydraulic tester →fault detection tester →printing and coating →finished product
It mainly applies to fluid pressure pipe including water pipe, gas and steam heating pipe, boiler pipe; round, square and rectangle pipe such as threading line pipe, scaffold pipe, fitness equipment pipe and super highway pile pipe; high precision pipe including automobile transmission shaft pipe and carrier roller pipe of conveyor.

II Main characteristics
1. Supplying loading, uncoiler, shear and end welding, spiral accumulator, forming, welding, sizing cut-off machine, end facing machine, hydrostatic tester and packing machine and so on
2. Several models are available such as combination forming machine, common gantry type forming machine and cage roll forming machine and so on
3. Strictly ensuring interchange of each stand with supply special tool for roller change-over in convenient of operation

III Main technical parameter

Model Round Pipe Specification Square and Rectangle Pipe Specification
Diameter of Pipe
(mm)
Wall Thickness(mm) Outside Diameter
(mm)
Wall Thickness
(mm)
FM20 φ8-φ25 0.5-1.2 10×10-20×20 0.5-1.0
FM32 φ12-φ38 0.6-2.2 10×10-25×25 0.6-1.8
FM50 φ12-φ50 0.8-3.0 15×15-40×40 0.8-2.5
FM60 φ12-φ63 0.8-3.5 15×15-50×50 0.8-3.0
FM76 φ21-φ76 1.0-4.0 20×20-60×60 1.0-3.5
FM89 φ33-φ89 1.5-4.5 25×25-70×70 1.5-4.0
FM114 φ48-φ114 1.5-5.0 40×40-90×90 1.5-4.5
FM140 φ48-φ140 1.5-5.5 40×40-110×110 1.5-5.0
FM165 φ60-φ165 2.0-6.0 50×50-130×130 2.0-5.5
FM219 φ89-φ219 3.0-8.0 70×70-180×180 3.0-7.0
FM273 φ114-φ273 4.0-10.0 90×90-220×230 4.0-10.0
FM325 φ165-φ325 4.0-12.0 130×130-250×250 4.0-12.0

Note: This unit is non-standard product and parameter is for your reference only. We can customize machine according to customer’s request.
Copyright(C)2005-2012 Dalian Deyou Machinery Equipment Co.,LTD